Stainless steel handle bar with rubber...
€200.00
Model
Characteristics
Price HT
Stock
Shipping time
Model
Characteristics
FH 2 See specifications
Characteristics
Measuring range [Max] N:
2 N
Readout [d] N:
0.001 N
Option Factory calibration certificate (Tensile):
Option Factory calibration certificate (Pressure):
Option Factory calibration certificate (Tensile/Pressure):
€486.00 HT €540.00
Price HT
Stock
Shipping time
Action
1
Available from stock
48 - 72h
Model
Characteristics
FH 5 See specifications
Characteristics
Measuring range [Max] N:
5 N
Readout [d] N:
0.001 N
Option Factory calibration certificate (Tensile):
Option Factory calibration certificate (Pressure):
Option Factory calibration certificate (Tensile/Pressure):
€486.00 HT €540.00
Price HT
Stock
Shipping time
Action
14
Available from stock
48 - 72h
Model
Characteristics
FH 10 See specifications
Characteristics
Measuring range [Max] N:
10 N
Readout [d] N:
0.005 N
Option Factory calibration certificate (Tensile):
Option Factory calibration certificate (Pressure):
Option Factory calibration certificate (Tensile/Pressure):
€486.00 HT €540.00
Price HT
Stock
Shipping time
Action
9
Available from stock
48 - 72h
Model
Characteristics
FH 20 See specifications
Characteristics
Measuring range [Max] N:
20 N
Readout [d] N:
0.01 N
Option Factory calibration certificate (Tensile):
Option Factory calibration certificate (Pressure):
Option Factory calibration certificate (Tensile/Pressure):
€486.00 HT €540.00
Price HT
Stock
Shipping time
Action
12
Available from stock
48 - 72h
Model
Characteristics
FH 50 See specifications
Characteristics
Measuring range [Max] N:
50 N
Readout [d] N:
0.01 N
Option Factory calibration certificate (Tensile):
Option Factory calibration certificate (Pressure):
Option Factory calibration certificate (Tensile/Pressure):
€486.00 HT €540.00
Price HT
Stock
Shipping time
Action
15
Available from stock
48 - 72h
Model
Characteristics
FH 200 See specifications
Characteristics
Measuring range [Max] N:
200 N
Readout [d] N:
0.1 N
Option Factory calibration certificate (Tensile):
Option Factory calibration certificate (Pressure):
Option Factory calibration certificate (Tensile/Pressure):
€486.00 HT €540.00
Price HT
Stock
Shipping time
Action
5
Available from stock
48 - 72h
Description
- Turnable display with backlight
-
Can be mounted on all SAUTER test stands - Data interface RS-232, included
-
Standard attachments: as shown below, extension rod: 90 mm -
Delivered in a hard carrying case - Selectable measuring units: N, lb, kg
- Real time or Peak Hold Mode to observe transcients or capture peaks
- Measuring with tolerance range (limit-setting function): Upper and lower limiting can be programmed, in pull and push direction. The process is supported by an acoustic and visual signal
- Auto-Power-Off
- Internal memory for up to 10 measurements
- Mini Statistics Kit: calculates the average result from up to ten stored single results, min., max., n
Specific references
- EAN13
- 4045761140509
You might also like
Cable fixture tension and fracture to 5 kN...
€105.00
Ring fixture for tension and fracture...
€65.00
1-jaw-clamp to 500 N - AC 40
€1,250.00
Standard attachments for Force gauges...
€106.00
Round sensor to 1000 N - AC 47
€190.00
Pressure disc, Ø 110 mm for compression...
€60.00
Transport case - MPS-A09
€160.00
Software for Length measuring devices LD -...
€270.00
